Product ID:IBM, PHOTO CHEM, ELECTROPHOTOGRAPHIC TONERS
MSDS Date:05/07/1986
FSC:6850
NIIN:00N057497
MSDS Number: BWQSW

ARLINGTON INDUSTRIES INC

3307 N RIDGE AVE
ARLINGTON HTS, IL 60004
US

Emergency Phone: 800-323-4147

Info Phone: 708-394-3100

Cage: 56970

ARLINGTON INDUSTRIES

LINCOLNSHIRE, IL 60069 US

Telephone: 800-323-4147

Cage: 56970

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

ACRYLIC RESINS

OSHA PEL N/K

ACGIH TLV: N/K

STYRENE ACRYLIC RESINS

OSHA PEL N/K

ACGIH TLV: N/K

SILICA, CRYSTALLINE-FUSED; (SILICON DIOXIDE (AMORPHOUS))

CAS: 60676-86-0

RTECS: VV7328000

OSHA PEL N/K

ACGIH TLV: N/K

MODIFIED RESINS

OSHA PEL N/K

ACGIH TLV: N/K

POLY (2-PROPYL-M-DIOXANE-4,6-DIYLENE)(POLYVINYL BUTYRAL

CAS: 63148-65-2

RTECS: TR4955000

OSHA PEL N/K

ACGIH TLV: N/K

MODIFIED MALEIC ROSIN ESTER

OSHA PEL N/K

ACGIH TLV: N/K

POLYAMIDE

OSHA PEL N/K

ACGIH TLV: N/K

COPOLYMER, ALLYL STYRENE; (STYRENE ALLYL ALCOHOL COPOLYMER)

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:WOULD NOT APPEAR TO
BE TOXIC ACCORDING TO THE PROVISIONS OF THE UNITED STATES FEDERAL
HAZARDOUS SUBSTANCES LABELING ACT. SKIN/EYES:WOULD NOT BE
CONSIDERED TO BE EITHER A PRIMARY SKIN IRRITANT OR AN EYE
IRRITANT. INGESTION:WOULD BE CONSIDERED NON TOXIC VIA INGESTION.
CHRONIC:NONE LISTED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGESTION:CALL MD IMMEDIATELY . EYES:FLUSH WITH COPIOUS
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. SKIN:WASH AFFECTED AREA
WITH SOAP AND WATER. INHALATION:REMOVE TO FRESH AIR. IF IRRITATION
PERSI STS CONTACT A PHYSICIAN.

Lower Limits:2.5%
Upper Limits:16%
Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. FIRE MAY PRDCE HAZ DECOMP PRODS SUCH AS CARBON DIOXIDE, CARBON,
CARBON MONOXIDE, ETC.
Unusual Fire/Explosion Hazard:LIKE MANY FINELY DIVIDED MATERIALS, TONER
DUST IN HIGH CONCENTRATIONS CAN FORM EXPLOSIVE MIXTURES IN AIR
WHICH, IF IGNITED, COULD RESULT IN DUST EXPLOSIONS.

Spill Release Procedures:MINIMIZE GENERATION OF DUST DURING CLEAN-UP.
USE OF A VACUUM CLEANER IS PREFERABLE TO A BROOM. COLLECT THE
MIXUTRE AND PLACE IN A CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID EXCESSIVE HEAT DURING STORAGE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:NONE REQUIRED. FOR EMERGENCY USE, WEAR
NIOSH/MSHA APPROVED SELF-CONTAINED BREATHING APPARATUS.
Ventilation:NONE REQUIRED.
Protective Gloves:NONE REQUIRED.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:149F,65C
Spec Gravity:0.9 (H*2O=1)
Appearance and Odor:ODORLESS BLACK, POWDERY POLYMERIC MATERIAL.

Stability Indicator/Materials to Avoid:YES
OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
NITROGEN OXIDES, POSSIBLE HCN, UNIDENTIFIED ORGANICS.

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . NO SPECIAL DISPOSAL REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.